Skip to main content

Fabcore India Pvt Ltd

Home  /  Services  /  Industrial Infrastructure Our Services

Industrial Infrastructure

Fabcore supports industrial and commercial projects with practical infrastructure solutions, from pre-engineered buildings and warehouse facilities to HVAC systems and fabricated tanks and vessels. We focus on understanding each project's requirements and coordinating the right design, materials, fabrication and execution approach.

Service 01

Pre-Engineered Buildings (PEB)

Pre-engineered buildings are steel structures planned and manufactured using an engineered system of primary frames, secondary members and building accessories. Instead of treating every component as a separate construction item on site, the structure is designed as a coordinated building system. This approach can help streamline fabrication, transportation and site assembly for industrial and commercial facilities.

Fabcore's PEB solutions are intended for projects that require functional, adaptable building space. The building layout and structural arrangement should be developed around the intended use, clear-span requirements, building dimensions, site conditions, access points and future operational needs. The result is a building framework that can be configured for manufacturing, storage, workshops or other industrial activities.

From early requirement discussions through structural fabrication and erection coordination, each project needs careful attention to engineering details, connection points, roofing and wall systems, drainage and safe access.

  • Engineered steel building systems
  • Project-specific dimensions and layouts
  • Roofing and wall cladding options
  • Fabrication and site erection coordination

Key Components of a PEB Structure

A pre-engineered building is made up of connected structural and building-envelope components that work together as one system.

Primary Structural Frames

Main steel frames form the building's principal load-bearing structure. Their design is based on the building span, length, height, roof arrangement and relevant project loads.

Secondary Members

Purlins, girts and bracing members support the roof and wall sheeting while helping transfer loads through the structural system. Their spacing and arrangement are coordinated with the building design.

Roofing & Wall Cladding

Metal roof and wall sheets form the external envelope of the building. The selection and detailing should consider weather exposure, drainage, ventilation, insulation needs and the intended use of the facility.

Accessories & Openings

Doors, windows, ventilators, gutters, downpipes, ridge details and other accessories help make the building usable and support access, daylight, ventilation and rainwater management.

From Fabrication to Site Erection

A PEB project involves more than supplying steel members. The building must be planned so that the fabricated components arrive in an organised sequence and can be assembled correctly at the site. Foundation and anchor-bolt coordination, connection details, lifting access and erection sequencing are important parts of project planning.

Project requirements should be reviewed early so the structural system, cladding, openings and building services can be coordinated before installation begins.

ApplicationsFactoriesIndustrial shedsWorkshopsCommercial buildings

Important Project Considerations

Clear project inputs help establish a suitable building configuration and reduce avoidable changes during execution.

Building Requirements

Define the intended use, required floor area, clear span, eave height, access requirements and any internal crane or equipment provisions.

Site & Environmental Conditions

Site location, ground conditions, wind exposure, rainfall, drainage and applicable local regulations should be reviewed by the project engineering team.

Future Expansion

If future extension is expected, the possibility should be considered during the initial layout and structural planning rather than assumed after construction.

Building Services

Lighting, ventilation, electrical routing, HVAC, fire and life-safety provisions and utility access need coordination with the building design and applicable project requirements.

Service 02

Industrial Warehouses

A warehouse is more than a covered storage area. It is a working facility where goods are received, checked, stored, moved, picked and dispatched. Its building layout and infrastructure should support the way materials flow through the operation, while providing suitable space for storage systems, handling equipment, vehicles and staff.

Fabcore approaches warehouse infrastructure with attention to the building's purpose, storage method, goods movement, loading and unloading requirements, available site area and expected operating conditions. Depending on the project, the warehouse structure may use a pre-engineered steel building system, with suitable roofing, cladding, openings and supporting infrastructure.

Good planning considers the relationship between storage capacity and movement space. A layout that maximises floor area but restricts forklift movement, loading access or emergency routes may create operational problems. These requirements should be considered together at the planning stage.

  • Industrial storage building solutions
  • Loading and unloading access planning
  • Roofing, cladding and ventilation
  • Layouts based on operational flow

What Makes a Functional Warehouse?

Each area should support a clear part of the storage and distribution process.

Storage & Racking Areas

The storage arrangement depends on the type, size, weight and movement frequency of the goods. Floor storage, pallet racking or other storage systems should be planned with suitable aisle widths, access and load requirements.

Loading & Unloading Bays

Vehicle access, dock positions, door dimensions and manoeuvring space affect how efficiently goods move between transport vehicles and the warehouse. These areas should match the types of vehicles and handling methods used.

Roofing, Cladding & Drainage

The building envelope helps protect stored goods from weather. Roof slope, gutters, downpipes, wall cladding, sealing and site drainage should be considered in relation to local rainfall and site conditions.

Ventilation & Lighting

Natural or mechanical ventilation and suitable lighting help create a more usable working environment. The right arrangement depends on stored materials, occupancy, heat generation and operational requirements.

Plan Around the Movement of Goods

An efficient warehouse layout provides a logical route from receiving to storage and then to picking, packing and dispatch. Separating vehicle movement from pedestrian routes, allowing room for material-handling equipment and keeping access points clear can support safer day-to-day operations.

The layout should also account for goods that need special handling, inspection or controlled storage conditions. These requirements can influence the building arrangement and any additional services needed.

Suitable forDistribution centresManufacturersLogisticsInventory storage

Warehouse Planning Checklist

These are useful inputs to discuss before finalising the building and facility layout.

Goods & Storage Profile

Identify the goods to be stored, their dimensions, weight, packaging, storage conditions, stock rotation and expected inventory volume.

Handling & Vehicle Access

Confirm forklift or pallet-truck use, loading equipment, vehicle types, turning space, dock requirements and the number of loading positions.

People & Operational Areas

Allow for receiving, inspection, packing, dispatch, offices, staff facilities and safe pedestrian access as required by the operation.

Safety & Compliance

Fire protection, emergency exits, structural design, electrical systems, signage and other statutory requirements must be addressed by the relevant qualified project professionals.

Service 03

HVAC & Industrial Services

Fabcore's HVAC offering covers equipment supply, system installation, project execution, after-sales service and the trading of HVAC spares and materials. The objective is to support projects through the equipment and materials required for air-conditioning systems, along with installation, commissioning and ongoing service requirements.

Different buildings and applications require different air-conditioning arrangements. Ductable systems may be considered for areas requiring distributed air delivery through ducts, while VRF systems offer a multi-indoor-unit approach for projects with varied zone requirements. Cassette and split units are also available for project-based requirements. The suitable option depends on the building layout, cooling load, usage pattern and project specifications.

In addition to equipment, HVAC work can include duct fabrication, installation, commissioning, troubleshooting and maintenance. Fabcore also offers HVAC-related materials and spares, including copper piping, insulation, GI ducting materials, flexible ducts, air distribution accessories, refrigerant gases, drain materials and consumables.

  • Equipment sales and project supply
  • HVAC duct fabrication
  • Installation and commissioning
  • Service, breakdown support and AMC

HVAC Equipment Sales

Equipment selection should be based on the building, cooling requirement, zoning, installation conditions and project specifications.

Carrier Systems

Equipment sales include Carrier air-conditioning systems for suitable project requirements. The model and system configuration should be selected after reviewing the cooling load, application, site conditions and technical specifications.

Ductable AC Systems

Ductable air-conditioning systems distribute conditioned air through a network of ducts to selected areas. They are commonly considered where a concealed installation and air distribution through multiple outlets are required. Duct design, airflow, static pressure and access for maintenance need to be planned correctly.

VRF Systems

Variable Refrigerant Flow (VRF) systems connect multiple indoor units to an outdoor unit arrangement and regulate refrigerant flow according to zone demand. They can suit projects with several rooms or zones that need individual control. Correct system design, piping limits, capacity selection and manufacturer requirements are essential.

Cassette & Split Units

Cassette and split air-conditioning units are available for project requirements. Cassette units are generally ceiling-mounted and distribute air across the room, while split units use separate indoor and outdoor sections. Supply is considered for projects rather than being presented as an unrestricted retail offering.

HVAC Duct Fabrication

Ductwork carries conditioned air between the HVAC equipment and the spaces being served. Its dimensions, shape, material, joints and routing affect airflow and system performance. Duct fabrication must follow the project drawings and coordinated site measurements so the sections can be installed correctly within the available ceiling or service space.

Depending on the design, the duct network may include straight sections, bends, transitions, branches, access provisions and connections for diffusers or grilles. Proper coordination with other building services helps avoid clashes during installation.

Related itemsGI ductingFlexible ductsDampersDiffusers & grilles

Installation & Project Execution

From equipment positioning to final commissioning, installation must follow the approved design and equipment manufacturer's requirements.

Site Review & Coordination

Review equipment locations, piping and drain routes, duct paths, electrical requirements, access clearances and coordination with ceilings and other building services before installation.

System Installation

Installation may include indoor and outdoor units, refrigerant piping, insulation, condensate drain lines, ductwork, supports, controls and associated accessories according to the project scope.

Testing & Commissioning

Commissioning checks are carried out in line with the equipment and project requirements. These may include checks of connections, drainage, controls, operating modes and system performance before handover.

Project Handover

At handover, operating guidance and relevant equipment information should be provided. Maintenance access, filter cleaning, service intervals and warranty conditions should be clarified with the client.

Service, Breakdown Support & AMC

Air-conditioning systems need periodic inspection and maintenance to help keep them operating as intended. Fabcore's after-sales service offering includes installation and commissioning support, breakdown service, troubleshooting, gas charging where required and Annual Maintenance Contracts (AMC).

AMC scope and visit frequency should be agreed according to the equipment, operating hours, site conditions and client requirements. A maintenance plan may include inspection, cleaning, checks of electrical and control components, drain-line checks and review of system operation. Refrigerant diagnosis and charging should be performed by qualified technicians using the correct refrigerant and safe procedures.

Service offeringBreakdown serviceTroubleshootingGas chargingAMC

HVAC Trading – Spares & Materials

HVAC materials and consumables supplied for project installation, maintenance and repair requirements.

Copper Pipes & Fittings

Copper piping and compatible fittings used in refrigerant line installations. The pipe size, wall thickness and fittings must match the system design and equipment requirements. Copper products are available through Totaline.

Insulation Materials

Armaflex or equivalent insulation materials for suitable HVAC piping applications. Insulation selection and thickness should consider pipe size, operating temperature, ambient conditions and condensation control requirements.

GI Ducting Materials

Galvanised iron ducting materials used in air distribution systems. Sheet specifications, duct dimensions, reinforcement and jointing details should follow the approved duct design.

Flexible Ducts

Flexible ducts connect selected air distribution points and can help accommodate routing constraints. Correct sizing, length, support and installation are important to avoid unnecessary airflow resistance.

Dampers, Diffusers & Grilles

Air distribution and control components used to regulate, direct or deliver airflow. Selection depends on airflow volume, room layout, ceiling arrangement and the required air distribution pattern.

Refrigerant Gases

Refrigerants supplied for compatible air-conditioning equipment. The refrigerant type must always match the equipment nameplate and manufacturer specification; different refrigerants must not be mixed.

Drain Pipes & Fittings

Materials used to route condensate water away from indoor units. Correct sizing, slope, jointing and termination help prevent leakage and drainage problems.

Fasteners & HVAC Consumables

Installation accessories and consumables used for supports, duct assembly, piping and general HVAC project work. The type and specification should suit the application and site conditions.

Planning an HVAC Project?

To help identify a suitable system and supply scope, prepare the building layout, room usage, approximate area, cooling requirements, project location and any available equipment schedule or consultant specification. Final equipment selection, capacity and installation details should be confirmed through a technical site assessment and approved design.

Service 04

Industrial Tanks & Vessels

Industrial tanks and vessels are fabricated containers used to store, collect, buffer or hold liquids and process materials in industrial facilities. Their design depends on what they will contain, the required capacity, operating conditions, installation location and the way they connect with the surrounding process or piping system.

Fabcore's fabrication offering includes industrial tanks and vessels, surge vessels and process tanks in stainless steel (SS) and mild steel (MS). Each type serves a different purpose. A storage tank may hold a process liquid, a surge vessel may help manage temporary fluctuations within a system, and a process tank may form part of a manufacturing or treatment operation.

Material selection, plate thickness, dimensions, supports, nozzles, manways, access arrangements, surface finish and inspection requirements should be established from the project's operating data and applicable design standards. The final specification must be reviewed by competent engineering personnel for the intended service.

  • Industrial tanks and vessels
  • Surge vessels
  • SS and MS process tanks
  • Fabrication based on project requirements

Our Tank & Vessel Fabrication Range

Equipment type and construction details are selected according to the function and operating conditions of the project.

Industrial Tanks & Vessels

Fabricated tanks and vessels are used in industrial facilities to store or hold liquids and process materials. Their configuration may be vertical or horizontal, depending on capacity, available space, process connection and installation requirements. The design may include inlet and outlet nozzles, vents, drains, supports, access openings and level-instrument connections as required.

Surge Vessels

Surge vessels are used in selected process and piping systems to accommodate temporary changes in flow, pressure or liquid volume. Their purpose and design depend on the system in which they operate. Operating pressure, fluid properties, connection sizes, capacity and control requirements must be established before fabrication.

Stainless Steel (SS) Process Tanks

Stainless steel process tanks are considered where corrosion resistance, cleanability or compatibility with the stored or processed material is important. The appropriate stainless-steel grade, thickness, weld finish and internal surface requirements depend on the process and material characteristics.

Mild Steel (MS) Process Tanks

Mild steel process tanks are used in many industrial applications where the material is suitable for the service conditions. Depending on the liquid or process material, protective coatings, linings or other corrosion-control measures may be required and should be specified by the project engineer.

Fabrication & Construction Considerations

Tank fabrication starts with defining the required capacity, geometry, material and operating conditions. Plate preparation, rolling, fit-up, welding, nozzle installation, support fabrication and finishing are coordinated according to the approved drawings and fabrication procedure.

Inspection and testing requirements depend on the tank's service, design category and applicable codes or project specifications. Where the equipment is intended for pressure service, design, fabrication, inspection and testing must be governed by the relevant pressure-vessel code and qualified engineering approval. A storage tank should not be assumed suitable for pressurised service.

Fabrication focusMaterial selectionWeld qualityNozzle layoutInspection

Information Needed for a Tank Fabrication Enquiry

Providing these details helps the engineering team understand the requirement and determine the appropriate next steps.

Capacity & Dimensions

Required working or total capacity, preferred orientation, available installation footprint, height limitations and any transport or access restrictions.

Material & Contents

Whether SS or MS is preferred, the material or liquid to be contained, its temperature and relevant chemical or corrosion characteristics.

Operating Conditions

Whether the tank is atmospheric or pressurised, operating and design pressure where applicable, temperature range, duty cycle and any process requirements.

Connections & Inspection

Inlet and outlet sizes, drain and vent connections, manways, supports, instrumentation points, coating or lining requirements and specified inspection or testing documents.

Designed for the Intended Industrial Service

A tank or vessel must be suitable for the material it contains and the conditions under which it operates. Correct material selection, fabrication quality, connection details, supports and inspection planning all contribute to reliable service.

Sharing the process data, drawings, capacity requirement and site information at the enquiry stage helps establish a clear scope for engineering review and fabrication.

ApplicationsProcess industriesManufacturing plantsUtility systemsIndustrial facilities

Planning an industrial infrastructure project?

Tell us about your building, HVAC, warehouse or tank fabrication requirements. Our team can help discuss the next steps.

Talk to Our Team